Protectakote - Anti Slip Coating

Click here to visit the dedicated Protecta-kote Website

Protecta-kote is a single pack polyurethane which cures into an attractive, tough, textured coating, with excellent abrasion, chemical resistance and non-slip qualities. Protecta-kote is available in two versions; the standard aromatic and UVR aliphatic. It is also available in two levels of dilution:



Spray - for application by a wide nozzle underbody (Schutz 4mm bore) spray gun, which screws directly onto the 1 litre can (available from NVP). This version is only available in standard dark grey and black.

 

 

  

Brush/Roller - for application by  'stipple' roller (available direct from NVP in small diameter 4" and standard 7" rollers) or by brush, available in 1 litre and 4 litre tins.

 

 

 

Kits - With this simple to use roll on bed liner kit its now easy for anyone to have a tough anti-slip coating in their pick-up truck, van or 4x4 in only a few hours. The kit includes special rollers making it easy to apply to the corrugated backs of vans and pick-ups.

 

 

Colours:

Black, Dark Grey, Red, Blue, Dark Green, Safety Yellow (UVR), White (UVR), Red (UVR), Green (UVR), Blue (UVR), Mid-Blue (UVR), Cream (UVR), Sand (UVR), Black (UVR), Mid Grey (UVR), Light Grey, Tan (UVR) and Transparent (UVR)

Product Uses:

  • Load areas of pick-up trucks and vans for protection and non-slip properties
  • Floors and steps of transporters and buses
  • Ramps for wheelchair access
  • Emergency exits and fire escapes
  • Non-slip areas around machinery
  • Bridges, steps, walkways, decks and helicopter pads on ships
  • Waterproofing and non-slip surfaces in showers, change rooms and ablution blocks
  • On rubber tread flooring for additional non-slip performance
  • Boat decks, gunwales, jetties etc

Features:

  • Tough and weather resistant
  • Easy to apply -brush, roller or spray, skilled labour not required
  • Will not taint water or food once cured
  • Bonds to many surfaces except un-primed metal
  • Can be over-coated to match specific colour requirements
  • Resists many solvents, good chemical resistance to organic and inorganic acids
  • Non-abrasive
  • Totally Flexible, will not chip, flake or peel
  • Economical - will last for years
  • Heat resistant
  • Anti-slip (even in wet conditions)
  • Bonds to most surfaces
  • Easy to apply -brush, roller or spray
  • Easy to repair - Will bond to itself so no need to remove before recoating
  • Resistant to abrasion and impact resistant
  • Resistant to saltwater, fuels and most solvents
  • Anti-Corrosive
  • UV resistant version available  suitable for areas with high UV exposure and fully exposed to weathering.

For more detailed information about Protecta-kote visit the dedicated Protecta-kote website here.

To order Protecta-kote for next day delivery, visit the NVP online store