Anti-Slip Polyurethane Floor Paint

A fine textured anti slip floor paint made with high quality resins. Ideal as a general purpose floor paint for internal walkways, factory & workshop floors

More details

£ 32.95 inc VAT

£ 27.46 (VAT excl.)

*All Colours are a representation and may differ from the actual colour once applied.

Use Our Coverage Calculator


1 coat(s):

2 coat(s):

These coverage figures are only designed as a guide and will depend on the porosity of the substrate.

This Polyurethane anti slip floor paint is based on a high quality resin system with fine crushed dolomite incorporated in it to give a simple to apply low profile anti-slip finish. It is suitable for application to most surfaces and provides a hard wearing finish that is resistant to water, oil and many standard chemicals.
The product is ideal for general walkways, factory and garage floors. It will provide excellent durability and colour retention. 
Please note that we only recommend this product for internal use and short term exterior use, for long term exterior applications we recommend using Safekote or the Heavy Duty anti slip floor paint. (see other listings)

The benefits of the paint are:

  • Easy to apply straight from the tin.
  • Self priming direct from the tin, when applying to absorbent materials such as bare concrete the first coat should be diluted 10% with white spirit.
  • Suitable for application in low temperatures (5oC)
  • Water, Oil and chemical resistant.
  • Tolerant to mild existing contamination.
  • Hard wearing and durable finish
  • Suitable for commercial environments
  • Won't cause flash rust on exposed metals
  • Reduces dust and is easy to clean
  • Cost effective protection.

Colours: Red (04C39), Green (14C39), Grey (00A05), Mid-Grey (00A09) (New),  Blue (20D45) and Black. Safety Yellow is now only available in our HD Anti-Slip Floor Paint.

Realistic coverage: 8 - 10 sq metres per litre
Sizes: 5 litre & 20 (4 x 5) litres (see other listing)

Dry to Touch: 2-4 hours at 20oC with some ventilation/air movement.
Overcoating Time: 16 hours (do not exceed 5 days for over-coating)
Curing: Suitable for light traffic after 24 hours and fully cured after 5/7 days.
Application: Easy to apply with standard short/medium pile rollers or by brush.
Do NOT apply to concrete until it is fully cured, this will take a minimum of 6-8 weeks depending on the depth of the slab, if in doubt always apply a test patch first.

*Please note that the BS 4800 codes and samples shown are intended only as an approximate guide. Colours will vary depending on the settings of your monitor and the light that you view it in. The BS 4800 codes are the nearest colour references available but are not necessarily an exact match.

  • Thinners White Spirit
  • Area of Use Interior only.
  • Anti-Slip Yes

Related articles on blog

Customers who bought this product also purchased

01235 427000

Closed Today