Organowood 02 Repellent

7350065300885

OW02

Product available with different options

Choose your product

Please use the drop down menus to view all the colour & size options available
arrow_drop_down

Cost

£18.54 Inc VAT

£15.45 Excl VAT

This works out at: £18.54 per litre
100% secure payments

Not sure how much you need? Try out our Coverage Calculator

arrow_drop_down arrow_drop_up
x

1 coat(s):

1 coat(s):

These figures are designed to give you an approximate guide only. Coverage can vary significantly depending on the condition and porosity of the substrate.

Description

Reviews

FAQ

Organowood 02 Dirt & Water Repellent is the second component in the Organowood system, designed to increase the protection of the timber against dirt, water and damp. It uses a water emulsion incorporating organic silicon polymers and natural growth substances but does not include any biocides or toxic heavy metals. It is designed to be used in conjunction with 01 Protection to create a complete protection system for softwoods and European hardwoods together with other specified timber based products.


The organic silicon polymers in the product bind to the fibres in the wood which once dry combine to form an extremely water repellent surface making it impossible for damp, water and water borne dirt to penetrate the timber and prevent the growth of mold and algae. The product is completely free of biocides and heavy metals such as copper, chromium and arsenic. The product is transparent and will not significantly effect the appearance of the wood, there might be some slight lightening to the appearance of the wood but over time it will develop an even silvery grey patina.

Available in 1L, 5L and 10L (please note the 10L will come in 2 x 5L bottles).

Coverage:
1 litre will cover approximately 8-10m² per coat. For vertical surfaces two coats are recommended.

Application:
Apply to timber previously treated with Organowood 01 Protection, the minimum application temperature is 10°C. Do not apply when there is any likelihood of rain, dew or frost and ensure that any glass is protected as the liquid could react with with glass.

  • Shake the container well and apply in the wood direction of the wood grain with a brush or roller.
  • Allow to dry for 2-4 hours
  • For optimal protection apply a second coat as above
  • Maintenance coats should be applied as required

Maintenance:
Due to the dense surface structure that is created treated timber should not be painted with conventional paints or stains. On vertical surfaces where two coats have been applied a maintenance coat will be required approximately every 10-15 years, on horizontal decking a maintenance coat will be required every 12-18 months. The interval between maintenance coats can vary significantly depending on the location and the UV exposure levels.

Cleaning Equipment:
After using Organowood equipment should be thoroughly cleaned with water and a washing detergent or alternatively with an appropiate organic solvent such as acetone.

Technical Information:
Physical form: Water emulsion
Colour: White, becomes transparent when dry
pH: 6-8
Odor: Slight odor
Density: 0.8 – 1.0 g/ml
Dilution: Shall not be diluted
Ingredients: Organic silicon polymers, natural growth substances
Storage and stability: Should be kept in closed containers at 10 - 30 °C. If stored properly, the product is stable for at least 2 years.
Environment: Does not contain any substances classified as environmentally hazardous.

For further technical information on Organowood 02 Repellent please see the attached product information sheet.

There are currently no FAQs, please check back later.