Sale! Osmo MS Trade Wood Flooring Adhesive View larger

Osmo MS Trade Wood Flooring Adhesive

EAN:

6045651834530

MSTRADE15

£ 68.48 inc VAT

£ 57.07 (VAT excl.)

OsmoUk MS Trade is a single component adhesive uniquely formulated for the installation of bamboo, block parquet, engineered plank, pre-finished and unfinished solid wood flooring in internal locations.The formulation is solvent and isocyanate free with low odour and neglible VOCs making it ideal for both domestic and business installations.
The special formulation has excellent early build strength and immediate grab which quickly builds to a tenacious but still elastic bond as the adhesive cures.

Key product features:

  • Ready to use with no mixing required
  • Its low VOCs & solvent free formulation doesn't affect air quality
  • Retains stable peaks when applied by a notched trowel
  • Permanently Flexible
  • Solvent, Water & Isocyanate free
  • Easy to apply
  • Rapid build up of final bonding strength
  • VOC meets class A+

Recommended Areas of Use:

Osmo MS Trade Flooring adhesive is suitable for bonding many different types of floors including parquet (strips & mosaic), plank floors and block floors on both porous and non porous substrates.

Application Instructions:
  • Ensure that the surface is dry, clean, smooth and dust free
  • Do not dilute
  • Minimum application temperature for the adhesive is 15°C
  • Only apply with the recommended trowel
  • Working time is approximately 30 minutes at 23°C 50% RH
  • The adhesive is moisture cured therefore reasonable air humidity and ventilation is required to ensure complete drying.
  • Parquet flooring can be walked on after 24 hours (at normal temperatures & humidity)
  • Follow flooring manufacturer's guidelines
  • Ensure the floor is level and that at least 80% of the adhesive is in contact with the board.

Coverage:

Up to 1m² per kg

Sizes:

15 kg

Please Note:

  • Always carry out a test to ensure compatability before doing any project. Read the manufacturer's guidelines and instructions carefully before starting any work.
  • Do not place the flooring on the adhesive if a skin has formed
  • Do not apply on frozen surfaces or standing water
  • Do not use on wet, contaminated or friable substrates

Recommendations:

  • The Flat V notch trowel is recommended for all solid, engineered, pre-finished or unfinished timber and bamboo in all thicknesses.
  • The Square notch trowel is recommended for dry back parquet
  • There must be a minimum transfer of 80% to the wood flooring to guarantee installation.
  • Underfloor heating must be switched off for 24 hours before use, during and after installation. The temperature can then be gradually built back up to avoid any thermal shock
  • Area of Use Interior only.
  • Suitable for Floors Yes

Faqs

    What is the difference between  Osmo MS Advance Wood Floor adhesive and MS Trade Wood Flooring Adhesive ? ...

    The key difference between the MS Trade and the MS Advance version of the Osmo flooring adhesive is that the trade includes more filler and therefore less active ingredients hence the reduced price of the trade product and better coverage of the advance version. Although both products would be suitable for most flooring projects, we would only recommend the Trade version for engineered wooden flooring as they are more dimensionally stable than solid boards. The stronger MS Advance is suitable for both engineered and solid floors as it will give better adhesion and be more resistant to any movement in the timber.