Osmo Polyx Oil Rapid 3232 Satin│3262 Matt│3240 White
Choose your productPlease use the drop down menus to view all the colour & size options available
Osmo Polyx Rapid Hardwax Oil is a professional faster drying version of the Osmo Polyx Oil Original with enhanced surface hardness and usually dries within 4 - 6 hours, allowing 2 coats to be applied in 1 day. It is available in 3232 clear satin, 3262 clear matt and 3240 transparent white
Osmo's Polyx Rapid oil combines all the advantages of oils and waxes in one unique product. Osmo Polyx®-Oil Rapid is resistant to water and dirt, is very durable and smoothens wood surfaces. In comparison to conventional finishes, the natural vegetable oils and waxes allow for an even colouring and a harmonic, smooth surface result.
3232 Clear Satin
3262 Clear Matt
3240 White Transparent Satin
(Please note that although Osmo have changed the name of the 3232 from Satin-Matt to Satin there has been no actual change to the product or its finish).
125ml, 750ml, 2.5 litres, 10 litres
Easy application – no need for a primer or sanding between coats – saves time and money. It meets the wood's natural demands: It is microporous and does not crack, flake, peel or blister.
Resistant against wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A (German industrial norm). When dry, the finish is safe for humans, animals and plants (suitable for children's toys as per. EN 71.3 (European norm) and fast to perspiration and saliva in accordance with. DIN 53160 (German industrial norm)).
Ideal for all wooden floors, solid or plank wood, strip parquet, OSB or cork flooring. Highly recommended for wooden furniture. Also for slate and screed as well as terracotta and other natural (non-glazed) ceramic tiles. Please note that because the final finish is dependent upon the substrate as well as the product used so always carry out a test area before the main application, all Osmo Rapid finishes are available in 125ml tester pots.
Coverage approx 24m² per litre
Number of coats: 2 coats on raw wood
Apply thinly and evenly to the clean and dry wood along the wood grain with a suitable brush, Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and spread well within 10-15 minutes. Wipe away any excess product and allow to dry for approx. 4-5 hours with good ventilation. After drying, apply a second coat also thinly and quickly.
When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.
It is generally recommended to apply just one coat of the 3240 followed by a clear coat however if a more intensive coloured finish is required a second coat can be applied but please be aware that the surface will be more difficult to maintain and keep at its best. If a more intensive white finish is required we recommend using Osmo Wood Wax finish for the first coat.
Surfaces treated with Osmo Polyx Oil Rapid are easy to maintain and keep clean. For regular cleaning either use the Osmo spray Mop or damp mop using Osmo Wash and Care. For stubborn stains or to refresh high wear areas that have gone dull use Osmo Liquid Wax Cleaner.
Hints and tips:
- Do not use with exotic timbers with a high oil content
- Make sure the area is well ventilated otherwise drying times can become extended
- When applying a clear coat over the top of a coloured coat always allow to dry for 24 hours
- Usee Osmo wood protector 4006 base coat first when using in bathrooms or kitchens.
For more information please see the attached product information and MSDS sheets.
Thinners - White Spirit
Area of Use - Interior only.
Suitable for Doors - Yes
Suitable for Floors - Yes