Polyurethane Floor Paint 5 litres
  • Sale!
  • Polyurethane Floor Paint 5 litres
  • Polyurethane Floor Paint 20 (4 x 5) litres
  • A first floor office floor before application.
  • Wooden floor after application with Flag Polyurethane Floor Paint.

A hard wearing polyurethane paint with good chemical & wear resistance. Made from high quality resins, designed to seal and protect concrete, stone & wooden floors. Ideal for factory, workshop and garage floors.

Last items in stock

Choose your product

Please use the drop down menus to view all the colour & size options available
*All Colours are a representation and may differ from the actual colour once applied.


£64.95 Inc VAT

£54.13 Excl VAT

This works out at: £6.50 per litre
100% secure payments

Not sure how much you need? Try out our Coverage Calculator

arrow_drop_down arrow_drop_up

1 coat(s):

2 coat(s):

Please note that this figure is only an approximate guide.



Data Sheets



This hard wearing single pack polyurethane floor paint made by Flag Paints is designed to protect, seal and colour internal concrete, wooden and stone floors.

Using high quality resins it provides a tough petrol and oil resistant finish with excellent durability. Ideal for factory, garage and workshop floors.

Thin with white spirit when applying to porous substrates, use white spirit to clean tools after use. The Coverage figures are only given as an approximate guide as it will depend on the substrate and its condition.

For absorbent/bare surfaces use 2 coats, thin the first coat with up to 10% White Spirit and use white spirit to clean tools after use.

This paint is simple to apply and should be applied with standard short/medium pile rollers or brush.

The Flag Polyurethane Floor Paint product is basically the same as the Flag anti-slip Polyurethane floor paint but without the graded crushed dolomite.


Concrete, Stone and Wooden floors


  • Blue (BS 4800 20D45)
  • Black
  • Light Grey (BS 4800 00A05)
  • Red (BS 4800 04C39)

Tin Sizes:

Available in 10 litres (packed as 2 x 5 litre tins)

Technical Information:

  • Finish:                                    Semi Gloss
  • Volume Solids:                       48%
  • *Theoretical spreading Rate: 12 - 15m² per litre
  • Flash Point:                            38°C
  • Specific Gravity:                     1.10 - 1.20
  • Dry to Touch:                          2 - 4 hours
  • Overcoating Time:                  16 hours (do not exceed 5 days)
  • Thinner:                                  White spirit
  • Tool Cleaning:                         White Spirit
    *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances. We would expect a realistic coverage rate to be approximately 10 -12m² per litre.

*Please note that the BS 4800 codes and samples shown of the Flag Polyurethane Floor Paint are intended only as an approximate guide. Colours will vary depending on the settings of your monitor and the light that you view it in. The BS 4800 codes are the nearest colour references available but are not necessarily an exact match.

Thinners - White Spirit

Area of Use - Interior only.

Anti-Slip - No

Suitable for Floors - Yes

Finish - Semi Gloss

There are currently no FAQs, please check back later.

Flag Polyurethane Colours

Guide to available colours


Flag Polyurethane Info

Product Information Sheet for Flag Polyurethane Floor Paint