Anti Corrosive QD (Quick Drying) Metal Primer 1 litre View larger

Anti Corrosive QD (Quick Drying) Metal Primer

£ 9.95 inc VAT

£ 8.29 (VAT excl.)

*All Colours are a representation and may differ from the actual colour once applied.

Use Our Coverage Calculator

x

1 coat(s):

1 coat(s):

These figures are designed to give you an approximate guide only. Coverage can vary significantly depending on the condition and porosity of the substrate.

Flag anti-corrosive QD (quick drying) metal primer is a high build quick drying anti-corrosive primer for use on ferrous metals and provides good protection prior to over coating with most solvent based finishing products. Suitable for a wide variety of applications where speed and ease of application are required. Compatible with Protectakote, Protectakote UVR, Safekote Marine. Please note that it is not suitable for galvanised steel.

Area of Use: Internal & External

Substrates: Ferrous Metals

Packing: 1, 2.5 & 5 Litre

Colour: Red

Technical Specification:
  • Finish:  Matt
  • Volume Solids: 60%
  • Coverage: 10 - 12 m² per litre
  • Flash Point: 23°C
  • Specific Gravity: 1.45 - 1.5
  • Dry to touch: 15 minutes
  • Over coating Time: 4 hours
  • Thinners & Cleaning: Xylene
Application Method: Brush, Conventional Spray, Airless Spray

Surface Condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil
  • Thinners Xylene

Customers who bought this product also purchased

01235 427000

Open Today 9am-5:30pm