Flag Paints's Teak oil is a high quality blend of natural oils and gum turpentine, for use on garden furniture, classic teak and outdoor furnishings and any wood substrate ready for an oil finish, or to be rejuvenated and maintained by use of an oil finish.
Flag Paint's Teak Oil is a pale amber oil blend which is ideally suited to feed dry wood in both interior and exterior use. It gives a light, natural looking satin finish that enhances the natural beauty of wood and does not leave a finish that can be picked away.
To achieve a good finish, be sure that wood is dry and free of contaminants such as grease and wax, or anything which will act as a barrier to the wood substrate. If necessary to, lightly sand with a good quality sandpaper and remove any dust with a lint free cloth.
Apply liberally with a clean dry rag or brush. allow to stand for several minutes then wipe off any excess, do not allow to puddle.
Flag's Teak Oil can be buffed to a satiny sheen after a few hours. On new wood, two or three coats will be necessary. Stop applying once the surface is saturated and the oil stops seeping into wood surface.
Clean brushes with white spirit.
Color: Pale Amber
Volume solids: 30%
Theoretical coverate rate: 10 to 20 m² per litre
Dry to touch: 8 - 12 hours (20°C)
Overcoating time: As required
Application method: Brush, Rag or Cloth
Cleaning of tools: White Spirit
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
Available in 500ml bottles & 5 Litre tins