Protectakote - Standard

Protectakote - Standard

Protecta-kote is a single pack polyurethane which cures into an attractive, tough, textured coating, with excellent abrasion, chemical resistance and anti-slip properties. Protecta-kote is available in two versions; the standard aromatic and UVR aliphatic. It is also available in two levels of dilution:

Spray - for application by a wide nozzle underbody (Schutz 4mm bore) spray gun, which screws directly onto the 1 litre can(available from NVP). This version is only available in standard dark grey and black.

Brush/Roller - for application by honeycomb 'stipple' roller (available direct from NVP in large diameter 3" & 9", small diameter 4" and standard 7") or by brush, available in 1 litre and 4 litre tins.

Kits - Contain a 4 litre tin. With this simple to use roll on bed liner kit its now easy for anyone to have a tough anti-slip coating in their pick-up truck, van or 4x4 in only a few hours. The kit is suitable for coating up to 6m².

Colours - Black, Dark Grey, Red, Dark Blue, Dark Green, Safety Yellow (UVR), White (UVR), Red (UVR), Dark Green (UVR), Olive Green UVR), Blue (UVR), Medium Blue (UVR), Cream (UVR), Sand (UVR), Black (UVR), Mid Grey (UVR), Dark Grey (UVR), Dark Brown (UVR) and Transparent (UVR).

See Protectakote UVR section for more information. 

Product Uses:

• Load areas of pick-up trucks and vans for protection and non-slip properties
• Floors and steps of transporters and buses
• Ramps for wheelchair access
• Emergency exits and fire escapes
• Anti-slip areas around machinery (Nb. whilst often known as non-slip coatings, it is impossible to ever get a completely non-slip finish.)
• Bridges, steps, walkways, decks and helicopter pads on ships
• Waterproofing and non-slip surfaces in showers, change rooms and ablution blocks
• On rubber tread flooring for additional non-slip performance
• Boat decks, gunwales, jetties etc

Features:

• Tough and weather resistant
• Easy to apply -brush, roller or spray, skilled labour not required
• Will not taint water or food once cured
• Bonds to most surfaces except unprimed metal
• Can be over-coated to match specific colour requirements
• Resists many solvents, good chemical resistance to organic and inorganic acids
• Non-abrasive
• Totally Flexible, will not chip, flake or peel
• Economical - will last for years...
• Heat resistant
• Anti-slip (even in wet conditions)
• Bonds to most surfaces
• Easy to apply -brush, roller or spray
• Easy to repair - Will bond to itself so no need to remove before recoating
• Resistant to abrasion and impact resistant
• Resistant to saltwater, fuels and most solvents
• Anti-Corrosive
• UV Resistant version available  suitable for long term external use.