Flag Rust Converter
Choose your productPlease use the drop down menus to view all the colour & size options available
Flag Rust Converter is a water based heavy duty rust converter which not only neutralises and encapsulates the rust but also forms a tough and attractive black satin finish. It can be left as a standalone finish or can be overcoated with a solvent based primer or topcoat, please note that it should not be overcoated with Xylene based paints such as Protectakote, Safekote or Flag's Anti Corrosive QD Metal Primer. If in doubt it is always advisable to do a test patch. As with all water based finishes it should not be applied when the substrate and/or the ambient temperatures are below 10°C.
Areas of use:
Interior and Exterior (nb. minimum application temperature of 10°C)
Ferrous Metals, Can also be used to overcoat wood and plastic. If in doubt always do a test patch first.
250ml, 1 litre, 2.5 litres and 5 litres
Volume solids: 40%
Theoretical spreading rate: 8 - 12 sq. metres per litre*
Flash point: N/A
Specific gravity: 1.20
Dry to touch: 1 hour (at normal room temperature and humidity)
Over-coating time: 4-6 hours
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.
Application method: Brush, Spray (Minimum DFT 75μm, adjust accordingly for rough surfaces)
Cleaning of tools: Water
Ensure surface is free from all flaking material, dust, dirt, oil and grease. Metals (especially new/forged items) may require degreasing. Do not apply in temperatures below 10 degree centigrade.
Area of Use - Interior or Exterior
Finish - Satin