Osmo Wood Wax Clear Extra Thin (1101)
Choose your productPlease use the drop down menus to view all the colour & size options available
Not sure how much you need? Try out our Coverage Calculatorarrow_drop_down arrow_drop_up
These figures are designed to give you an approximate guide only. Coverage can vary significantly depending on the condition and porosity of the substrate.
Osmo Wood Wax Finish Clear Extra Thin (1101) is a natural oil/wax based interior finish for exotic wood species. In one simple application it produces a rich professional satin finish which can be polished for a higher sheen. The grain and texture of the exotic wood is accentuated. Water-repellent and dirt resistant, will not suffer from water marks.
Key Product Features & Benefits:
- Designed for oil rich woods such as Teak, Walnut, Cedar, Iroko, Mahogany etc.
- Penetrates deeply.
- Resistant to common liquids such as water, fruit juice, tea, cola and wine.
- Protects against dirt, abrasion and moisture.
- Suitable for Children's toys and food application areas once fully dry.
- Microporous breathable finish which does crack, peel, flake or blister.
- Easy to maintain with no snding back required for maintenance coats or spot applications.
Recommended Area of Use:
Designed to deeply penetrate into exotic and dark wood species such as Jatoba, Meranti, Mahogany, Merbau, Ebony etc. Ideal for wooden flooring, furniture and joinery, suitable for all interior wood. Can also be used in bathrooms and kitchens without the need for a base coat.
For interior use only. Typical uses include ceiling profiles, joinery, skirting, doors, paneling and interior timber cladding. Especially recommended for children's toys and furniture. Can also be applied to flooring. For use on a wooden floor apply just one coat and follow up with a coat of clear Polyx®-Oil. During application process the ventilation quality can affect drying times.
24m²/L with one coat. Two coats recommended. Use roller or brush. Apply at a temperature between +5°C to 35°C. Approximate drying time is 24hrs.
Store in a dry place. Can last for up to 5 years if kept closed tightly. If thickened by frost it will regain normal consistency if left at a regular temperature for a minimum of 24hrs.
Ensure wood surface is dry and clean. Product is ready to use as is. Do not thin, stir well before use. Clean or gently sand old microporous finishes, remove any old varnish and ensure all small cracks, larger dents and small holes in the wood are filled and smooth.
Osmo Wood Wax Finish Clear Extra Thin can be applied by brushing, wiping, dipping, or spraying in an enclosed unit.
Apply evenly along the wood grain with a Natural Bristle Brush or a lint-free cloth (e.g. for furniture).
1st coat: apply thinly. Allow to dry for approx. 30 minutes with good ventilation. Wipe away any excess product. Reapply to unsaturated areas.
Repeat for a 2nd coat.
Recommended number of coats: 1 coat for furniture / 2 coats for flooring.
When renovating, one coat applied to a clean and dry surface is usually sufficient.
Always test the product on a small sample area before complete application.
For non-exotic wood species such as Oak, Pine or Spruce use Osmo Polyx®-Oil.
Some wood species have different levels of natural oil, resin and tanning content. Exotic wood species have a very high natural oil content and this product is designed for these types of woods.
Over application and/or low ventilation can increase the drying times.
Area of Use - Interior only.
Anti-Slip - No