Bilge & Locker Paint by Flag Paints
Choose your productPlease use the drop down menus to view all the colour & size options available
Not sure how much you need? Try out our Coverage Calculatorarrow_drop_down arrow_drop_up
These figures are designed to give you an approximate guide only. Coverage can vary significantly depending on the condition and porosity of the substrate.
Flag Paint's Bilge and Locker paint is an economic one coat paint for all internal surfaces with good resistance to oil, water, grease, salt and fresh water. Easy to maintain and keep clean. Please note it is not suitable for permanent immersion.
Area of use:
Flag Bilge & Locker paint is suitable for Bilges, lockers and engine compartments
Wood, GRP, Steel and concrete
1 litre, 2.5 Litres
Off-White, Light Grey
Technical Information for Bilge Paint:
Volume Solids: 60%
Theoretical Coverage: 10 - 12m² per litre
Flash Point: 38°C
Dry to Touch: 4 - 6 Hours
Overcoating: 16 hours
Thinner: White Spirit
Flag Bilge and Locker Paint can be applied by brush, roller, conventional spray and airless spray. The surface should be stable, firm, dry and free of any dust, loose or flaking paint, dirt, grease, oil or salt. Any smooth areas of paint being over coated should be lightly abraded and cleaned prior to application.
Key Product Features:
- Easy to use and apply
- High resin content
- Tough & chemical resistant
- Single Coat Application
For more information on Flag's Bilge and Locker paint please see the product information sheet and Material Safety Data Sheet.
Thinners - White Spirit
Area of Use - Interior or Exterior
What is the difference between bilge paint and normal polyurethane floor paints?
Bilge paint is a unique formulation which is designed to be a single coat application product, unlike normal floor paints. It is more flexible than conventional floor paints and is designed to offer enhanced resistance to oil, parafin and salt water on internal surfaces.