Flag Bilge Paint 1 Litre



Flag Bilge and locker paint is specifically formulated for use in the bilge areas of yachts and motor boats, it gives an easy to clean protective finish with excellent resistance to water, oil, grease, salt and fresh water. Flag's Bilge and locker paint is available in light grey and off white in 1 or 2.5 litre containers.

Choose your product

Please use the drop down menus to view all the colour & size options available
*All Colours are a representation and may differ from the actual colour once applied.
Order QTY Price per item You will save an additional
2 or more £15.15 £0.80 per item
4 or more £14.75 £1.20 per item


£15.95 Inc VAT

£13.29 Excl VAT

This works out at: £15.95 per litre
100% secure payments

Not sure how much you need? Try out our Coverage Calculator

arrow_drop_down arrow_drop_up

1 coat(s):

2 coat(s):

These figures are designed to give you an approximate guide only. Coverage can vary significantly depending on the condition and porosity of the substrate.






Flag Paint's Bilge and Locker paint is an economic one coat paint for all internal surfaces with good resistance to oil, water, grease, salt and fresh water. Easy to maintain and keep clean. Please note it is not suitable for permanent immersion.

Area of use:

Flag Bilge & Locker paint is suitable for Bilges, lockers and engine compartments

Suitable Substrates:

Wood, GRP, Steel and concrete


1 litre, 2.5 Litres

Available Colours:

Off-White, Light Grey

Technical Information for Bilge Paint:

Finish:                          Satin
Volume Solids:             60%
Theoretical Coverage: 10 - 12m² per litre
Flash Point:                 38°C
Dry to Touch:               4 - 6 Hours
Overcoating:               16 hours
Thinner:                       White Spirit

Application Method:

Flag Bilge and Locker Paint can be applied by brush, roller, conventional spray and airless spray. The surface should be stable, firm, dry and free of any dust, loose or flaking paint, dirt, grease, oil or salt. Any smooth areas of paint being over coated should be lightly abraded and cleaned prior to application.

Key Product Features:

  • Easy to use and apply
  • High resin content
  • Tough & chemical resistant
  • Flexible
  • Single Coat Application

For more information on Flag's Bilge and Locker paint please see the product information sheet and Material Safety Data Sheet.

Thinners - White Spirit

Area of Use - Interior or Exterior

  • What is the difference between bilge paint and normal polyurethane floor paints?

    Bilge paint is a unique formulation which is designed to be a single coat application product, unlike normal floor paints. It is more flexible than conventional floor paints and is designed to offer enhanced resistance to oil, parafin and salt water on internal surfaces.