Flag Heavy Duty Anti-Slip Floor Paint (Non-Slip Paint)
Choose your productPlease use the drop down menus to view all the colour & size options available
Not sure how much you need? Try out our Coverage Calculatorarrow_drop_down arrow_drop_up
This coverage calculator is only intended as a guide, coverage can vary depending on the finish and porosity of the substrate.
Flag Paint's Heavy Duty Anti Slip Floor Paint is made using a blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty elastomeric coating that offers a tough, durable, flexible and long lasting low profile anti-slip finish. Available in 7 different colours from stock, including Safety Yellow.
Please note that Latex screeds should NOT be sealed or painted as they are designed for floor coverings such as tiles, wooden floors or carpets and are not suitable for painting.
Key Product Features:
- Hard wearing and economic to use
- Good abrasion resistance
- Suitable for external and internal applications
- Good anti-slip properties (see detailed report below)
- Easy to apply
- Quick drying
- Available in large range of colours
- Low profile finish that is easy to clean and maintain
Areas of Use:
This heavy duty (Elastomeric) anti slip floor paint is ideal for areas that are subjected to frequent heavy use such as stairs, walkways, industrial work areas and car parks. The paint incorporates a finely crushed dolomite stone to give a low profile fine textured anti slip finish which is easy to maintain and clean. The product also has good UV resistance so can be used for external and internal applications.
Suitable substrates include Concrete, Stone, Tarmac, aged Asphalt, primed Ferrous Metals and Wood.
5 litres and 20 (4 x 5) litres
- Black BS 00 E 53,
- Blue BS 20 D 45, RAL 5013
- Green BS 14 C 39, RAL 6028
- Light Grey BS 00 A 05, RAL 7038
- Red BS 04 C 39, RAL 3009
- Mid Grey
- Yellow BS 08 E 51, RAL 1023
Please note because of the nature of the product the RAL and BS4800 colours provided are the closest available but not necessarily an exact match. The colours shown will appear different on different on different screens and printers, if in doubt always apply a test area first.
- Finish: Satin
- Volume Solids: 55%
- Theoretical Spreading Rate: 10 - 12 m² per litre
- Flash Point: 42°C
- Specific Gravity: 1.22
- Dry to touch @20°C: 2 hours
- Over Coating Time @20°C: 16 - 48 hours
- Thinner: HD Thinners only
- Slip Resistance (BS-7976): Dry 69, Wet 63, Rz 26.0μm
When applying Flag Heavy Duty Anti Slip Floor Paint (Elastomeric) the surface must be clean, stable, firm, dry and free of dust, grease & oil. Any loose materials including flaking or loose old paint must be removed prior to application. With porous substrates such as concrete the first coat should be diluted with HD thinners by 10%.
As with all paints, this product must be thoroughly mixed for several minutes with an appropriate paint stirrer, ideally a mechanical paint stirrer on a drill before use and then occasionally during application, a cursory stir with a screwdriver or stick and/or a shake is NOT sufficient.
New concrete should not be painted for a minimum of 6 - 8 weeks after laying, power floated concrete should be acid etched or mechanically prepared to remove the shine and give some texture to the surface prior to application. When applying to large area or if you are unsure of the suitability we always recommend carrying a test application to an inconspicuous area first.
For further details please see the product information sheet and MSDS.
Thinners - HD Thinners
Area of Use - Interior or Exterior
Anti-Slip - Yes