Osmo TopOils are a range of Clear or tinted oil-wax combination for treating furniture and kitchen worktops made of wood. Osmo TopOil is based on natural plant oils and waxes. Suitable for wood; the microporous surface does not crack, peel, flake or blister. It is resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A – with no water marks. When dry the finish is safe for humans, animals and plants and is suitable for children‘s toys as per EN 71.3 (European norm) and is saliva-resistant and sweat-proof according to DIN 53160 (German industrial norm).
TopOil 3058 is clear with a matt finish and 3028 is clear with a satin finish, as with most oils they will enhance the wood by bringing out the grain and darkening the timber to some extent. Topoil 3068 Natural counteracts the normal effect of oils by containing a small amount of white pigment to try and preserve the natural tone of the wood but this means it is only suitable on pale wood as on darker woods the white pigment will become visible. If there is any doubt always do a test first. TopOil 3061 Acacia has a satin finish and is lightly pigmented so designed to give the surface an elegant darker look.
Osmo TopOil is ideal for protecting interior furniture surfaces and work surfaces made of solid wood or edge-glued panels (e.g. kitchen worktops, desks, shelving etc.). Also suitable for cork and OSB. It is not recommended for exotic woods such as Teak, Iroko or Cedar, instead we recommend using Osmo Wood Wax Finish Extra Thin. Please note that although surfaces will be suitable for use 24 hours after application the surface will continue to get tougher for 2-3 weeks after application. For areas prone to dampness such as sink areas we recommend using Osmo Wood Protector 4006 as a base coat, as the base coat might have an effect on the appearnace of the wood it should be applied across the entire area and not in patches.
The wooden surface must be clean, dry (max moisture content 18%) and above 5°C. TopOil is ready to use and should not be thinned. Stir well before use. Old microporous surfaces must be cleaned thoroughly, old paints and lacquers must be completely removed. Do not sand surfaces any finer than P150 as this will effect the absorption of the oil, all sanding dust must be removed before application, we reccomend always wearing an appropiate mask when sanding. Because the final appearance can vary significantly depending on the age, condition and type of wood we recommend always doing a test patch first, all the TopOils are available in 5ml sachets as well as 500ml tins.
Cleaning & Maintenance:
Wood surfaces treated with TopOil are easy to maintain, most spills can simply be wiped up with a damp cloth. For regular cleaning we recommend using Osmo spray cleaner (8026) or add Osmo Wash and Care concentrate to water and clean the surface with a damp (not wet!) cloth.
Use Osmo Liquid Wax Cleaner to remove tough stains, this also helps to clean and regenerate the surface at the same time.
3028 - Clear Satin
3058 - Clear Matt
3061 - Acacia
3068 - Natural
Warning! Do not use aggressive cleaners or washing up liquid to clean surfaces treated with Osmo Top Oil as they will remove the coating.
Please see the product information sheet for further information.